|
Exercise N 1. Slot embedded conductor
Task
Draw a plot of current distribution within the conductor placed in the slot of electric motor.
Experiment
Current density is obtained by potential measuring along the part of conductor done by voltmeter. Phase is determined by digital phasemeter.
Problem type
Plane-parallel time-harmonic linear magnetic problem.
Geometry
Problem area is to the right of symmetry axis (line ab), corresponding boundary conditions are set.
Given data
Relative permeability of steel μ=100.
Relative permeability of air, copper μ= 1.
Conductivity of copper σ=57000000 S/m .
The steel is laminated, so its conductivity along the bar is σ=0 S/m.
Frequency f=50 Hz.
The total current per the bar is 600 A, or 300 A if there are two bars in the slot.
Boundary conditions
At the vertical axis of symmetry (line ab) Ht=0.
The field fades within ferromagnetics, thus at outer boundaries the field is zero A=0.
Results
Vertical distribution of current density (phase=0) along the copper bar (L=0 at the bottom of the slot).
Download problem files.
|
